NEONAIL Invisible Flexi Flexi Tips Base
Item available for immediate delivery, in stock
Item no.
oder direkt mit
-
Purchase On Account
-
Delivery in 2-3 days
Our recommendations for you
Filter
*contains reviews from the international parfumdreams shops. Reviews are not checked for authenticity
Product information
Description
Flexi Tips Base
Range
Invisible Flexi
Product sub-line
Nails
Product type
pen with sponge applicator
Area of application
nails
Use
1. give the nails their final shape with a 180 grit file (short - approx. 1 mm). Carefully matt the nail plate with a polisher (remember to remove only the shine without damaging the plate).
2.
2. carefully push back the cuticle with a wooden stick. If necessary, cut the cuticle with pliers or scissors.
3. choose the right size of invisible flexi tips - remember to cover the sides of the nail. Then wipe it with a cotton pad with a C-Leaner from underneath. Leave the tips prepared for application in this way.
4. degrease your nails with a cotton pad soaked in cleaner. Then apply it to the natural nail of Nail Prep and wait a few seconds for the product to evaporate.
5. apply a thin layer of primer to increase the adhesion of the product. Wait a few seconds for the liquid to evaporate.
6. apply a thin layer of FlexiTips Base to the natural nail and cure in the LED lamp according to the table. If your nails are flat, you can gently build them up with the FlexiTips Base.
7. apply a thin layer of FlexiTips Base directly to the cuticle tips, at the length that corresponds to your nail. Apply the product as close to the cuticle as possible, remembering to do this from the cuticle to the free edge. This will help you to avoid air contamination.
8. hold the tip steady on the nail plate and cure for about 15-30 seconds under the FlexiTips LED lamp. Then place your hand in the LED lamp and cure according to the chart.
9. after removing the nails from the lamp, wipe them with a C-Leaner from underneath and then give them the desired shape. You can now shorten them with a 100/180 grit file or a router.
10. then carefully matt the surface of the tip with a cleaning pad and wipe it with a cotton pad soaked in cleaner.
11. apply the selected colour of UV gel polish and cure it in the LED lamp according to the table
13. finally, apply the selected top coat and cure in the LED lamp according to the table. If necessary (the top has a dispersion layer), wipe the nails with cleaner.
2.
2. carefully push back the cuticle with a wooden stick. If necessary, cut the cuticle with pliers or scissors.
3. choose the right size of invisible flexi tips - remember to cover the sides of the nail. Then wipe it with a cotton pad with a C-Leaner from underneath. Leave the tips prepared for application in this way.
4. degrease your nails with a cotton pad soaked in cleaner. Then apply it to the natural nail of Nail Prep and wait a few seconds for the product to evaporate.
5. apply a thin layer of primer to increase the adhesion of the product. Wait a few seconds for the liquid to evaporate.
6. apply a thin layer of FlexiTips Base to the natural nail and cure in the LED lamp according to the table. If your nails are flat, you can gently build them up with the FlexiTips Base.
7. apply a thin layer of FlexiTips Base directly to the cuticle tips, at the length that corresponds to your nail. Apply the product as close to the cuticle as possible, remembering to do this from the cuticle to the free edge. This will help you to avoid air contamination.
8. hold the tip steady on the nail plate and cure for about 15-30 seconds under the FlexiTips LED lamp. Then place your hand in the LED lamp and cure according to the chart.
9. after removing the nails from the lamp, wipe them with a C-Leaner from underneath and then give them the desired shape. You can now shorten them with a 100/180 grit file or a router.
10. then carefully matt the surface of the tip with a cleaning pad and wipe it with a cotton pad soaked in cleaner.
11. apply the selected colour of UV gel polish and cure it in the LED lamp according to the table
13. finally, apply the selected top coat and cure in the LED lamp according to the table. If necessary (the top has a dispersion layer), wipe the nails with cleaner.
Contents
Bis-HPMA Poly(1,4-Butandiol)-14/IPDI Copolymer, Isobornylacrylat, Isobornylmethacrylat, Celluloseacetatbutyrat, Hydroxypropylmethacrylat, Acrylsäure, Ethyltrimethylbenzoylphenylphosphinat, Kieselsäure, BHT, p-Hydroxyanisole, CI 60725.
Warnings
For commercial use only. Please read the application instructions carefully. Avoid contact with skin. Avoid contact with eyes. Product may cause an allergic reaction. Stop applying if irritation occurs. Keep out of reach of children.
Protect from sunlight.
Manufacturer
You might also be interested in
