NEONAIL Liability and preparation 12-ply cellophane

The NEONAIL cellular tablets are the ideal aid for professional nail modelling. They are used for adhesion and preparation. They are ideal for cleaning and disinfecting fingernails. They can also be used to reliably remove excess layers of gel, such as the sweat layer. Thanks to their special structure, the cell tablets are particularly absorbent and gentle on the skin and nails. The reference to the structure specifically means that the cell tablets are 12-layered.

Cell tablets 12-ply: high quality and practical application

One roll contains 250 individual cell wipes. As they are 12-ply, they are particularly durable when working on the adhesion and preparation of nails. Thanks to their handy size and practical design, NEONAIL solutions are easy to use in daily nail care. Whether for thorough cleaning or removing gel residue - these accessories are always an indispensable aid for a clean and professional nail modelling result.

Step by step instructions:

Application:

Step 1: The natural nail is prepared by gently pushing back the cuticle with a rosewood stick. Then gently matt the natural nail with the polishing file. Any nail dust is removed with a cellular tissue soaked in cleaner.

Step 2: A thin layer of primer is then applied.

Step 3: The base coat is applied to the nail in a thin layer and cured using the LED lamp.

Step 4: A thin layer of the desired colour is then applied and cured under the LED lamp. A second thin layer of colour is then applied and also cured. Darker colours may require a longer curing time.

Step 5: The top coat is now applied to seal the coloured lacquer. After curing under the LED lamp, remove the colour perspiration layer with the cleaner.

Step 6: Finally, nail oil can be applied.

It is important to note: Before use, it is advised to roll the UV nail polish back and forth between your hands. With each coat, make sure that the tip of the nail is sufficiently coated.

Removal:

Step 1: The sealing layer is carefully roughened with a nail file.

Step 2: Soak the nail foil wraps in acetone and wrap them tightly around the fingernail. Leave on for about 10 minutes.

Step 3: The UV nail polish is gently removed with a rosewood stick without applying excessive pressure. If the polish is not yet completely removed from the fingernail, steps 2 & 3 can be repeated.