NEONAIL Nail files & buffers

If you are looking for nail files & buffers, the White Buffer Block from NEONAIL is an excellent choice. It is a high-quality sanding block that is completely white and offers four sides for preparing nails for polishing. The fine grit allows the surfaces of the nails to be matted. This preparatory step within the manicure offers the advantage of preventing the formation of bubbles when applying a UV nail polish. For this purpose, the manufacturer NEONAIL also recommends degreasing the nail plate and applying the polish in thin layers.

NEONAIL stands for more than just nail files & buffers! Products for professional manicures are the speciality of this manufacturer. It specialises in nail polishes, nail care products and electrical accessories such as LED lamps and nail cutters. So if you want to buy first-class UV nail polishes in addition to the White Buffer Block, you should take note of this brand. There are over 400 fantastic colours to choose from.

Step by step instructions:

Application:

Step 1: The natural nail is prepared by gently pushing back the cuticle with a rosewood stick. Then gently matt the natural nail with the polishing file. Any nail dust is removed with a cellular tissue soaked in cleaner.

Step 2: A thin layer of primer is then applied.

Step 3: The base coat is applied to the nail in a thin layer and cured using the LED lamp.

Step 4: A thin layer of the desired colour is then applied and cured under the LED lamp. A second thin layer of colour is then applied and also cured. Darker colours may require a longer curing time.

Step 5: The top coat is now applied to seal the coloured lacquer. After curing under the LED lamp, remove the colour perspiration layer with the cleaner.

Step 6: Finally, nail oil can be applied.

It is important to note: Before use, it is advised to roll the UV nail polish back and forth between your hands. With each coat, make sure that the tip of the nail is sufficiently coated.

Removal:

Step 1: The sealing layer is carefully roughened with a nail file.

Step 2: Soak the nail foil wraps in acetone and wrap them tightly around the fingernail. Leave on for about 10 minutes.

Step 3: The UV nail polish is gently removed with a rosewood stick without applying excessive pressure. If the polish is not yet completely removed from the fingernail, steps 2 & 3 can be repeated.