NEONAIL Base Coat Base Extra Clear
or directly with
Up to 2 free samples with every package
Free returns up to 180 days
NEONAIL’s Base Extra Clear is a transparent base coat that lays the foundation for a UV nail polish manicure. This product is characterised by its thick yet self-levelling consistency, which makes it easy to apply precisely without running into the edges of the nails. The specially shaped, short brush helps to ensure even application. As well as acting as a base coat, the special formula also allows for mechanical nail extension of up to 7 mm and helps to smooth out any unevenness. The base coat can also help to stabilise the nail plate and is suitable for touch-ups. After application, the product is cured under a UV or LED lamp.
- Transparent base for UV and LED nail varnishes
- Enables a mechanical nail extension of up to 7 mm
- Thick, self-levelling texture for precise application
- Suitable for smoothing and touching up the nail plate
- Cures under UV and LED light
Description
Base Extra ClearRange
Base CoatProduct sub-line
NailsItem no.
1254962Area of application
nailsOpacity
mediumCharacteristics
firming, smoothingConsistency
thickProduct type
pen with sponge applicator
Step 1: Shape the nail into the desired form. Push back the cuticle with a wooden stick or cuticle pusher. Then roughen the nail plate with the NEONAIL Buffer and brush the nails with the dust brush.
Step 2: Degrease the nails with Cleaner.
Step 3: Apply a thin coat of BASE as a base coat and cure in the LED or UV light curing device (do not clean the coat).
Step 4: Apply a thin layer of UV Nail Polish COLOR of your choice and cure in the LED or UV light curing device (do not clean the layer). Repeat the process.
Step 5: To seal, apply a thin coat of TOP and cure again in the LED or UV curing unit. Clean the nails with cleaner.
Step 6: Finally, use nail oil for an extra portion of care.
Removal:
Step 1: Roughen the UV nail polish with a file.
Step 2: Saturate the nail wraps with UV nail polish remover or acetone, wrap tightly around the finger and leave on for 7-10 minutes.
Step 3: Remove the UV nail polish with a rosewood stick or cuticle pusher.
Step 2: Degrease the nails with Cleaner.
Step 3: Apply a thin coat of BASE as a base coat and cure in the LED or UV light curing device (do not clean the coat).
Step 4: Apply a thin layer of UV Nail Polish COLOR of your choice and cure in the LED or UV light curing device (do not clean the layer). Repeat the process.
Step 5: To seal, apply a thin coat of TOP and cure again in the LED or UV curing unit. Clean the nails with cleaner.
Step 6: Finally, use nail oil for an extra portion of care.
Removal:
Step 1: Roughen the UV nail polish with a file.
Step 2: Saturate the nail wraps with UV nail polish remover or acetone, wrap tightly around the finger and leave on for 7-10 minutes.
Step 3: Remove the UV nail polish with a rosewood stick or cuticle pusher.
Cosmo Group Sp. Z.o.o.
Jasielska 10A, Poznán, Polen
www.neonail.de
kontakt@neonail.de
Ursprungsland/Herkunftsort
Polen
Anwendung und Gebrauch
Gebrauch, Aufbewahrung und Verwendung
Inhaltsstoffe
Bis-HPMA Poly(1,4-Butanediol)-14/IPDI Copolymer, Isobornyl Acrylate, Hydroxypropyl Methacrylate, Isobornyl Methacrylate, Cellulose Acetate Butyrate, Ethyl Trimethylbenzoyl Phenylphosphinate, Acrylic Acid, BHT, p-Hydroxyanisole, CI 60725.
Jasielska 10A, Poznán, Polen
www.neonail.de
kontakt@neonail.de
Ursprungsland/Herkunftsort
Polen
Anwendung und Gebrauch
Gebrauch, Aufbewahrung und Verwendung
Inhaltsstoffe
Bis-HPMA Poly(1,4-Butanediol)-14/IPDI Copolymer, Isobornyl Acrylate, Hydroxypropyl Methacrylate, Isobornyl Methacrylate, Cellulose Acetate Butyrate, Ethyl Trimethylbenzoyl Phenylphosphinate, Acrylic Acid, BHT, p-Hydroxyanisole, CI 60725.
- Cosmo Group Sp. z o.o. Sp. K.
- Jasielska 10a, PL-60-476 Poznań
- kontakt@neonail.de
Write the first review for Base Coat
Our recommendations for you
You might also be interested in
